Seaflo AC/DC High Flow Industrial Water Transfer Pump

• Customization: Available
• Usage: Dinking
• Type: Pump
• Model NO.: SFDP1-020-020-33
• Power Source: Electricity
• Drainage & Irrigation Mode: Sprinkler Irrigation Equipment
• Material: Metal and Plastic
• Ground Drainage and Irrigation Machinery Type: Pumping Irrigation
• Certification: ISO9001:2008, CE
• Condition: New
• Application Field: Industry
• Voltage: 24V
• Flow Rate: 7.6lpm/2.0gpm
• AMPS: 3.0A Max
• Pressure: 30psi/2.1bar
• Port Dimension: 0.82"(20.95mm)
• Diaphragm: Santoprene
• Valve: EPDM/Viton
• Protection: Thermal/Ignition Protection
• Application: RV/Marine/Yachts/Boat/Caravan/Water System, Ect
• Transport Package: Strong Carton/Poly Foam.
• Specification: CE
• Trademark: SEAFLO
• Origin: Fujian, China
• HS Code: 8413509090
• Production Capacity: 20000

Product Description

SEAFLO AC/DC high flow industrial water transfer pump
7.6LPM/2.0GPM 30PSI

Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected

Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto

In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet

The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity

Motor Voltage	12/24V DC
Type	3 chamber diaphragm pump, self priming, capable of being run dry
Mode	Demand or bypass
Certifications Option	CE Approval
Liquid Temperature	140°F (60°C) Max.
Priming Capabilities	6 feet (1.8 m)
Max Pressure	45psi (3.1bar)
Max Flow rate	11.6lpm (3.0gpm)
Thermal Overload Protected	Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports	10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle	Intermittent (under different pressure the continuous working time will also be different)
Motor options	2 pin connector
	On/off switch

Model	Switch	GPM/LPM	PSI/BAR	Max Draw (A)	Valves	Diaphragm	Ports	Voltage	Wire Connections
SFDP1-030-045-33	Demand	3.0/11.6	45/3.1	8.0	EPDM	Santoprene	1/2"-14 MNPT	12V	2-Pin/Leads
SFDP2-030-045-33	Demand	3.0/11.6	45/3.1	4.0	EPDM	Santoprene	1/2"-14 MNPT	24V	2-Pin/Leads
SFDP1-028-040-33	Demand	2.8/10.0	45/3.1	8.0	EPDM	Santoprene	1/2"-14 MNPT	12V	2-Pin/Leads
SFDP2-028-040-33	Demand	2.8/10.0	45/3.1	4.0	EPDM	Santoprene	1/2"-14 MNPT	24V	2-Pin/Leads