SEAFLO High Effective Beer Wort Pump
DESTRIPTION: The Seaflo beer pump is a non-self-priming magnetic drive unit built specially to handle hot wort
and cold liquids. The unit requires liquid being pumped to lubricate the internal parts. If the pump run dry for a
period of time the impeller and shaft may become damaged.
It can be used in home beer,hot water cir
DO NOT RUN PUMP DRY.
PERFORMANCE CURVE:
STANDARD PUMP SPECIFICATIONS:
| SPECIFICATIONS |
|
|
|
| Inlet Type |
Center Inlet |
| Pump Head Material |
Polysulfone |
Stainless Steel |
| Product Model |
115V |
SFBPA1-VP-G400-01 |
SFBPA1-VM-G400-01 |
| |
230V |
SFBPA2-VP-G400-01 |
SFBPA2-VM-G400-01 |
| Frequency |
60 Hz |
50 Hz |
60 Hz |
50 Hz |
| Max Flow |
7.5 gpm |
29.5 lpm |
7.5 gpm |
29.5 lpm |
| Max Head |
18ft/8psi |
4m |
18ft/8psi |
4m |
| Inlet Size |
3/4MPT |
| Outlet Size |
1/2MPT |
| Internal Pressure |
50psi/3.4bar Max |
150psi/10bar Max |
| Liquid Temperature |
250°F/120°C Max |
250°F/120°C Max |
| Net Weight |
5lbs/2.3kg |
6lbs/2.7kg |
| 60Hz |
|
W |
A |
HP |
RPM |
| |
115V |
123 |
1.58 |
1/25 |
3450 |
| |
230V |
130 |
0.83 |
1/25 |
3450 |
| 50Hz |
|
W |
A |
HP |
RPM |
| |
115V |
117 |
1.57 |
0.029 |
2850 |
| |
230V |
127 |
0.83 |
0.029 |
2850 |
| Overall Pump Size |
|
Length |
Width |
Height |
| |
Inches |
8.65 |
3.35 |
4.27 |
| |
mm |
219.8 |
85.0 |
108.5 |
INSTALLATION:
The directional arrows on the pump head show fluid direction through the pump.
The four screws on the pump head may be removed.
The pump head can be rotated to fit your piping system.
Follow all local electrical and safety codes and always disconnect power before performing work on or near the pump motor.
DIMENSION:
EXPLOSIVE VIEW:
| No. |
Part Name |
Material |
Quantity |
| 1 |
Screw |
SUS304 |
4 |
| 2 |
Pump housing (inline)-metal |
SUS304 |
1 |
| 3 |
Pump housing (inline)-plastic |
PPS+30%GF,SUS304 |
1 |
| 4 |
Pump housing (center inlet)-metal |
SUS304 |
1 |
| 5 |
Pump housing (center inlet)-plastic |
PPS+30%GF,SUS304 |
1 |
| 6 |
Thrust washer |
Teflon |
1 |
| 7 |
Impeller |
PPS+30%GF,SUS304,magnet |
1 |
| 8 |
O ring |
silicone |
1 |
| 9 |
Rear housing |
SUS304 |
1 |
| 10 |
Screw |
SUS304 |
4 |
| 11 |
Drive magnet |
PPS+30%GF,magnet,iron |
1 |
| 12 |
Screw |
SUS304 |
4 |
| 13 |
Pump bracket |
PA+30%GF |
1 |
| 14 |
Motor |
|
1 |
WARNING:
Acceptable For Indoor Use Only.
For use with maximum 120ºC (250ºF)
Non-submersible Pump
To reduce risk of electric shock, pull plug before servicing this pump.
To reduce risk of electric shock, see instruction manual for proper installation.
To reduce risk of electric shock, connect only to a properly grounded,grounding-type receptacle.
Do not use this pump in swimming pool or marine areas.
The pump must be cleaned and sanitized prior to use.
Do not run pump dry.
Audited Supplier 
){kind=link}